ART Headamp 6 PRO

Product description

The HeadAmp6 pro is a 6-channel headphone amplifier with an aux input per channel and a number of additional features. 
Each channel has a dual-function potentiometer that can be used to adjust either the balance of the main input signal or the ratio of the signal coming to the aux input and the main input signal on the given channel.

We can correct the sound with one bass and one treble equalizer per channel.
Each channel has a front and a rear 3.5 mm stereo jack output for easy installation and patching.
With two "MONO" switches, you can choose from four types of monitor mix modes (stereo, mono L, mono R and mono). The Level potentiometer is used to control the overall volume of the channel.

The rear and front stereo 6.3 mm jack outputs of each channel are connected in parallel, so you can use either or even both at the same time, or use them to drive additional headphone amplifiers.

The main input is located on the back, and XLR and balanced 6.3 mm jack connectors are available. Using "Thru" connectors identical to these, you can connect additional units in a bridge configuration.

There is also a stereo 6.3 mm jack main input on the front panel, in case you want to quickly plug in a stereo source. This input overrides the rear inputs, and the Master control potentiometer can be used to adjust the level of the incoming signal. At the main output and on the channels, we can get visual feedback on signal levels at all key points via a level meter consisting of eight LEDs.

•  6 independent, high-performance channels
•  18 headphones can be connected simultaneously
•  4 types of monitor mix modes
•  On every channel: low and high EQ, dual-function Panorama/Mix control, stereo Aux input (front panel), 1 front and 2 rear 6.3 mm headphone jacks, precise 4-LED level meter
•  Master volume control on the main output with 8 LED level indicators
•  Main insert jack on the front panel
•  Direct In connector
•  2 x XLR female, 9 x 6.3 mm inputs
•  Input impedance: 40 kOhm Main, 10 kOhm Direct, 15 kOhm Aux In
•  Output impedance: < 12 ohms (at headphone outputs)
•  Frequency response: 20 Hz - 50,000 Hz +0, -2 dB
•  Dimensions: 44.5 x 482.6 x 190.5 mm
•  Weight: 3.1 kg